What pinout?
BDM - It's on the first page.
CAN and Power - it was started here by Go4IT https://mk4-wiki.denkdose.de/artikel/keyless/kvm/pinout
Rfa module differences mondeo mk4 prefl
-
DGAlexandru
- Pro
- Posts: 364
- Joined: 04 Aug 2019, 22:47
Re: Rfa module differences mondeo mk4 prefl
@ DBAlexandru I think also that watchdog kick in before bootloader because on random times almost start flashing dead module and when poll modules in car I get sometimes some information from KVM
amplified in attachment is keyless shematic from wich I connected like this:
On blue connector C3 pin 3 GND
On yellow connector C4 pin 1 & 2 +12V
On brown conector C5 pin 15 MS Can High pin 14 MS Can Low, put 60 ohm resistor between
amplified in attachment is keyless shematic from wich I connected like this:
On blue connector C3 pin 3 GND
On yellow connector C4 pin 1 & 2 +12V
On brown conector C5 pin 15 MS Can High pin 14 MS Can Low, put 60 ohm resistor between
You do not have the required permissions to view the files attached to this post.