Page 4 of 5
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 29 Jan 2021, 11:55
by DGAlexandru
STN2120 might use other kind of response that isn't implemented in "check for ready read" routine...
I'll ask a friend to lend me his STN as I think his is based on this 2120 version and make the needed changes.
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 29 Jan 2021, 17:00
by Stevebe
just a note my
original ELS27 (from RU) works 38400
one of my CM327 works but slow 9600 second unit not work earlier version
both tunnel rAT work 38400
FOUND this utill
ELS27Baudrate.zip
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 29 Jan 2021, 17:38
by sanndo
China els27 - 2000000
E43C7CA5-BD74-453D-A898-26D4D64EF964.jpeg
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 30 Jan 2021, 10:54
by amplified
Yes, tested on 38400 -connects but, commands bug it and can't shine
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 30 Aug 2021, 08:11
by Solltex
Im update always convers on car, and today try test on bench. Connect 12+ on pin 32, ground pin 6, acc pin 4, but no acc, only logo light
, same prefacelift and facelift, where problem?
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 30 Aug 2021, 21:01
by ZvonimirG
Need can massage with ignition state to switch on IPC
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 04 Sep 2021, 07:06
by amplified
Search the forum, plenty of mentions of can message for ignition on and other stuff
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 04 Sep 2021, 18:36
by Solltex
all undestand, send from ucds can, 048 c0 18 78 09 29 02 e0 a0
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 04 Sep 2021, 20:30
by Gwe89
Does this work with Bluetooth elm327 or just USB
Re: Mondeo 4 Simulator for testing IPC on bench
Posted: 04 Sep 2021, 20:56
by Solltex
ucds usb cable
, same prefacelift and facelift, where problem?