Page 4 of 5
Re: Blis
Posted: 07 Dec 2020, 19:17
by Gwe89
avladimir wrote: ↑07 Dec 2020, 18:46
If memory serves me right there are two kinds of BCMs: 2.2 TDCi and the rest.
The part numbers should be:
- BG9T-14A073-Yx -> without TPMS
- BG9T-14A073-Xx -> with TPMS
similarly, for all other engines:
- BG9T-14A073-Dx -> without TPMS
- BG9T-14A073-Cx -> with TPMS
Replacement BCMs can only be ordered with TMPS, as far as I have observed.
There is no mention on BLIS on the BCMs so it should be safe to assume that all facelift BCMs have the private CAN built in.
I think the one fitted to my car is BG9T-14A073-BH
Think I need to get it all wired up and test it before I buy a bcm as there not cheap and would need to pay ford to program it
Re: Blis
Posted: 08 Dec 2020, 11:13
by avladimir
If your car is not 2.2 diesel, then Bx might be the one without TPMS and Cx is with TPMS. I think Dx is on pre-Facelift.
Re: Blis
Posted: 08 Dec 2020, 13:06
by Gwe89
avladimir wrote: ↑08 Dec 2020, 11:13
If your car is not 2.2 diesel, then Bx might be the one without TPMS and Cx is with TPMS. I think Dx is on pre-Facelift.
So possibly my bcm will support blis?
Re: Blis
Posted: 08 Dec 2020, 13:25
by avladimir
yup. absolutely. See if you have the corresponding pins on the BCM. If they are, there are very good chances to work.
Again, ETIS does not says something about BLIS in particular on the BCM, so you should be fine.
Re: Blis
Posted: 08 Dec 2020, 19:59
by Gwe89
avladimir wrote: ↑08 Dec 2020, 13:25
yup. absolutely. See if you have the corresponding pins on the BCM. If they are, there are very good chances to work.
Again, ETIS does not says something about BLIS in particular on the BCM, so you should be fine.
Thank you had a look and my bcm has the pins, mine is BK
Re: Blis
Posted: 09 Dec 2020, 22:25
by Go4IT
avladimir wrote: ↑07 Dec 2020, 18:46
If memory serves me right there are two kinds of BCMs: 2.2 TDCi and the rest.
Replacement BCMs can only be ordered with TMPS, as far as I have observed.
There is no mention on BLIS on the BCMs so it should be safe to assume that all facelift BCMs have the private CAN built in.
You are absolutely right with all three statements
Those "X-Parts" replace all subparts and integrate every function.
Re: Blis
Posted: 23 Dec 2020, 17:42
by Gwe89
20201223_173402.jpg
BG9T-14A073-BL no resistance on the 3RD-CAN pins
I would possibly say the same with the one fitted to my car which is BG9T-14A073-BK
Re: Blis
Posted: 04 Jan 2021, 09:50
by Gwe89
Gwe89 wrote: ↑23 Dec 2020, 17:42
20201223_173402.jpg
BG9T-14A073-BL no resistance on the 3RD-CAN pins
I would possibly say the same with the one fitted to my car which is BG9T-14A073-BK
When I check HS-CAN & MS-CAN pins i get 120ohm so I guess blis enabled cars use a certain bcm part number as i get nothing on both 3RD-CAN
Re: Blis
Posted: 19 Apr 2021, 18:15
by Gwe89
Gwe89 wrote: ↑23 Dec 2020, 17:42
20201223_173402.jpg
BG9T-14A073-BL no resistance on the 3RD-CAN pins
I would possibly say the same with the one fitted to my car which is BG9T-14A073-BK
Anyone know a part number for a 2.0tdci that had blis
Re: Blis
Posted: 19 Apr 2021, 20:02
by Gwe89
BG9T-14A073-CL
I found this one but I'm not sure